Drive ~ let’s go

It’s time for Brother Zhi to eat melon seeds once a week again!

　

Where did you spend 500 million?

AITO asks the new M7 to be officially launched.

Young MPV?

Tucki X9 declaration map exposure

Wuling pure electric "MPV" journey EV listed

High-level intelligent driving is only 150 thousand?

Baojun Yunduo Linxi Edition will be available soon.

Jianghuai QX PHEV officially listed.

　

Not much to say.

Let’s have a chat with you, Brother Zhi.

What new things happened in the car circle this week!

　

　

01 Wuling pure electric "MPV" journey EV listing

Recently, according to the official news of Wuling, Wuling Journey EV was officially listed, with a price range of 145,800-155,800 yuan.

In terms of appearance, Zhige thinks that the appearance of Wuling Journey EV is a bit like an extended version of Wuling van. The front face adopts a closed front grille design and a split headlight group design. The use of horizontal lines on both sides of LOGO highlights the sense of movement and design.

The shape of Wuling Journey EV is like a square box, and the waistlines on both sides highlight the three-dimensional sense of the car body. With unique wheels, it also adopts a suspended roof design, and the whole system comes standard with side sliding doors, which is fashionable and practical. The tail of the car body is relatively simple, and the split taillights are embedded.

In terms of interior, in addition to the basic configuration of the entry-level model, other models also provide leather-like wrapped seats, six-way manual adjustment of the main driver’s seat, ESP body stability control, reversing radar and other configurations, as well as 8-inch central control panel, cruise control and multi-function steering wheel. In addition, the new model will provide four seat layouts: 2-seat window-sealed, 7-seat, 8-seat and 9-seat passenger version.

In terms of power, the maximum power of Wuling Journey EV is 100 kW, the maximum torque is 240 Nm, and the maximum speed is 105 km/h. In terms of battery life, the car uses a lithium iron phosphate battery pack with a capacity of 57 kWh, and the CLTC cruising range is 360 kilometers. It takes 46 minutes to charge 30%-80% in fast charge mode.

Attention, cars:

Wuling’s Journey EV is an electric vehicle based on the Journey fuel version, with a price range of 145,800-155,800 yuan, which is a bit like a large van. It also provides passenger transport version and box truck model, and the application scenarios are very rich, no matter whether it is home or moving bricks, you can choose!

　

02 AITO asks the new M7 to be officially listed.

On September 12th, the new M7 series of AITO Zhijia medium and large SUV was officially launched. A total of five models were launched this time, with the starting price ranging from 249,800 to 329,800 yuan.

The new M7 in Wenjie is equipped with HUAWEI ADS 2.0 advanced intelligent driving system. The success rate of urban elevated import and export is over 99%, and high-speed and urban advanced intelligent driving can be completed without relying on high-precision maps.

The new M7 is also equipped with 27 sensing hardware such as an overhead lidar, three millimeter-wave radars, 11 high-definition visual sensing cameras and 12 ultrasonic radars. With Huawei ADS 2.0 system, it can identify obstacles more intelligently.

The new M7 also gives consideration to comfort. The length of the five-seat car has reached 3338mm, and each position is very spacious. Twelve 20-inch boarding boxes can be put in the trunk. The overall space of the front, middle and rear three rows of the six-seat version can reach 2605mm, and both the six-seat and four-seat models have a lot of room for expansion, and the 1.1-meter trunk can also hold four 20-inch suitcases.

The big five-seat version adopts the "cotton candy" seat, which has the functions of ventilation, heating and massage for four seats, and enjoys six seats with brand-new zero-gravity seats for a better ride experience. The rear cockpit screen can realize multi-device linkage, and the application can be transferred with the touch of the mobile phone, which enriches the entertainment activities of the passengers in the car.

In terms of safety, the welding production line of the new M7 has been upgraded and upgraded, using CBS composite body material, and the body structure is more solid and reliable, which is better than the mainstream models of luxury brands with a level of 500,000 on the market.

In terms of power, it is equipped with HUAWEI DriveONE extended-range electric drive platform, and the four-wheel drive version accelerates for 4.8 seconds in 100 kilometers, with a comprehensive battery life of 1300km under CLTC condition, a pure battery life of 240km, and a fuel consumption of 5.6L/100km under feed condition. In addition, the drag coefficient of the new car reaches 0.298Cd, which can effectively reduce energy consumption and drive more smoothly.

Attention, cars:

The new car body M7 has been improved in terms of safety and intelligent driving. In addition to better and stronger body materials, the HUAIWEI ADS 2.0 system it is equipped with has made greater progress in intelligent driving technology.

Yu Chengdong said that the upgrade of the new M7 has cost 500 million yuan. Do you think this money is well spent?

　

03 Tucki X9 declaration map exposure

According to the latest declaration information of the Ministry of Industry and Information Technology, we found the declaration map of Tucki X9. It is reported that Tucki X9 will be launched in the fourth quarter.

In terms of appearance, the X9′ s shape is cool, and the design of the closed front face and the matching of the penetrating light strip and the split light group are highly recognizable. There is also a grid grille under the front face, which is very eye-catching.

The side lines of the new model are smooth, equipped with hidden door handles, electric sliding doors and suspended roofs, with clear oblique waistlines on both sides, which is more dynamic and powerful.

As for the rear end, Tucki X9 adopts the design of penetrating lamp group, which is full of science and technology. In addition, the rear window of the new model is similar to the sliding back shape with a large inclination angle. In terms of body size, the length, width and height of the new car are 5293/1988/1785mm and the wheelbase is 3160 mm.

As for the interior, according to the previous pictures, Tucki X9 will adopt family-style design language, with large-size floating central control panel, embedded LCD instrument and double-width steering wheel, which is full of science and technology. It will also be decorated with leather material and special texture, which is more exquisite and advanced than Tucki G6.

In terms of power, the new Tucki X9 will be available in single-motor and dual-motor versions. The maximum power of the single-motor version is 235kW, and the maximum power of the motors before and after the dual-motor version is 135kW and 235kW respectively. The battery is a ternary lithium-ion battery of Zhongchuang Singapore Airlines.

Attention, cars:

The new Tucki X9 does not follow the steady and mature style of traditional MPV in modeling, but aims at the young MPV market and is made with a younger and more scientific design language. Diving, come out and comment on the value of this young MPV ~

In the increasingly competitive MPV market, in addition to appearance, pricing is also very important, and Zhige will continue to pay attention to it for everyone.

　

04 Baojun Yunduo Linxi Edition will be available soon.

According to the official news of Wuling Baojun, Baojun YunLinxi Edition will be listed on September 26th. The Linxi version was mainly upgraded in intelligent assisted driving, and was jointly built by Baojun and DJI Vehicle.

This edition of Baojun Yunduo Linxi is equipped with "Linxi Zhijia 2.0" jointly built by Baojun Yunduo and DJI Vehicle. It will be equipped with 8 megapixel inertial navigation binocular camera, 4 panoramic cameras and 1 rear monocular camera.

The new car will cancel the high-precision map and use the "global map-free" mode instead. The high-speed intelligent navigation function can be completed through BEV perception and vehicle navigation information.

The cross-floor memory parking function supports the route memory of indoor, outdoor and cross-floor scenes, supports starting at any position of the memory route, and can support the memory of parking routes up to 1km, and can remember up to 10 parking routes. The tracking and reversing function can return to the starting point with one key, and the effective distance of tracking and reversing can reach 100m m.

It is worth mentioning that the new car is also equipped with "the only one in its class" 0-130km/h full-speed intelligent driving assistance, and the lever can be turned on. The official said that it can realize intelligent driving functions such as intelligent congestion response, intelligent obstacle avoidance and intelligent lane change with one-button lever.

In terms of appearance, Baojun YunYunLinXi Edition is the same as the previous models, with round and full vehicle shape, closed front face design, split headlights with through daytime running lights, simple and exquisite. The side door handle is hidden, and the tail is equipped with through taillights and duckling tail rear spoiler. The car comes standard with multi-function electronic arms, four-way steering wheel adjustment, 8.8-inch instrument panel and 15.6-inch central control panel.

In terms of power, Baojun Yunyun has 360km and 460km battery life to choose from. The whole system comes standard with a 100kw high-power motor with a peak torque of 200Nm. In terms of charging, Baojun Cloud supports fast charging and slow charging.

Attention, cars:

Baojun Yunduo has sold well since its listing, with outstanding value and high cost performance. The Lingxi version launched this time does not talk about "martial arts", but has been upgraded in intelligent driving, with functions such as high-speed intelligent navigation assistance, cross-layer memory parking and tracking reversing.

At present, what we are most looking forward to is its price. According to the official information, the price of Baojun YunLinxi Edition will be 150,000. What do you think is the appropriate pricing?

　

05 JAC QX PHEV officially listed.

On September 15th, JAC QX PHEV was officially launched, and it was positioned as a compact SUV with a price of 129,900-149,900 yuan. The new model is a plug-in hybrid version of Sihao QX, which basically continues the design of Sihao QX.

Jianghuai QX PHEV adopts the aesthetic design concept of "intelligent universe", and its overall style is calm and atmospheric, with split headlight design and through LED strip, which is highly recognizable. The large-size borderless transverse grille has a more sense of design than Sihao QX.

On the side of the car body, JAC QX PHEV adopts double waistline design, with black skirts decorated on both sides, which highlights its layering and sportiness. In terms of body size, the length, width and height of the new car are 4605/1890/1700mm and the wheelbase is 2720 mm.

In terms of the rear end, the new model adopts a penetrating taillight design, and a number of horizontally parallel lines are matched with black decoration, which also makes the rear end more layered and reflects the simple theme style of the atmosphere.

In terms of interior, JAC QX PHEV adopts an embracing cockpit design and is equipped with a 12.3-inch dual screen, which can achieve good visual effects and is highly scientific and technological. Huawei, Tencent and Iflytek cooperated to build an intelligent interconnection system, which supports multi-functional voice interaction functions such as navigation, entertainment and information.

In terms of power, the new model is equipped with a plug-in hybrid system consisting of a 1.5L engine and a motor, which provides an economical, standard and sporty three-speed driving mode. Under CLTC working conditions, the pure electric cruising range can reach 120km, the comprehensive fuel consumption per 100 kilometers is only 1.53L, and the maximum cruising range can reach 1300km.

Attention, cars:

As the brand’s first new energy plug-in hybrid vehicle, JAC QX PHEV is both practical and comfortable, but also more environmentally friendly and fuel-efficient. Overall, the performance of this car is still good, and the configuration is full of sincerity, but it remains to be seen whether it can win the share in the highly competitive compact SUV market.

Compared with Sihao QX, Jianghuai QX PHEV is more economical. There is little difference in appearance, but it is more fuel-efficient and smarter. Are you excited about the price of 129,900 yuan?

　

　

All right! Brother Zhi, that’s all for this week.

Hot smell of rims, said the baggage and take the journey!

If you still want to eat melon seeds together

Remember to pay attention to the wisdom and drive.

　

　

A few days ago, the Equation Leopard spring conference I believe everyone paid attention to. The Equation Leopard family made a collective appearance, bringing new models such as Leopard 8, SUPER 3 and SUPER 9, which really made people feel bright.

(Note: The following figure is from the official release of Equation Leopard)

Like the equation Leopard Leopard 5, it is actually very familiar, and the popularity on the Internet has been very high. It is different from the traditional hard-core off-road based on oil, and adopts a special off-road platform for DM-o hybrid, and the overall drive is mainly electric. Driving in the city or taking it off-road, you can get a good experience. In terms of power, the comprehensive power of the system is 505 kW, the comprehensive torque is 760 Nm, the acceleration of 100 kilometers is 4.8 seconds, and the fuel consumption of 100 kilometers is 7.8 liters. In terms of chassis, CTB technology is adopted, and there are also versions equipped with cloud -P system. In terms of interior, it is equipped with Divare audio, refrigerator, fragrance, co-pilot screen, etc., which has a strong sense of science and technology. In terms of dynamic experience, the acceleration ability is the strength of this car. In the hybrid mode, the connection between oil and electricity is relatively smooth, and the feeling of pushing back deeply on the accelerator comes quickly. Chassis training is mainly comfortable, urban driving is relatively comfortable, and non-paved roads do not feel too much impact. Handling is not the strong point of this car. The highlight of Equation Leopard’s spring conference is actually the appearance of several new models.

Equation Leopard 8 is a hard-core off-road vehicle with a larger size, which is indeed stronger than Leopard 5 in the gas field. In terms of appearance design, the starship style design idea is adopted. In the front part, the energy shield type middle net is used, and the flying wing light groups on the left and right sides are also quite shiny. The snap-on front bumper under the lock adds a lot of mechanical feeling. There is a tough style of metal cutting on the side of the car body, with clear front and rear shoulder lines, thick C-pillar, hidden door handle and fashionable suspended roof. Energy propulsion taillights and planetary ring spare tire covers are used at the rear of the car body. In terms of face value, Leopard 8 is still very hard-driving, and there are also some bright spots in the details. In terms of product planning, Leopard 8 will be listed in the third quarter of this year, and the price may be more than 500,000.

SUPER 3 is the concept version of Leopard 3. The new car is a small hard-core SUV product, which means a bit of personality. The new car has a certain futuristic appearance, such as the luminous logo, the intelligent interactive screen under the logo, the drone on the roof, and the electronic exterior rearview mirror. Visually, the SUPER 3 mecha style is obvious, the body lines are prominent, and there is a feeling of wearing armor. In terms of details, the front and rear light groups use double-layer lines, the door handle is hidden, and the tires and rear spare tires use all-terrain tires. In terms of chassis, the official used the term "Star Wars chassis", and personal understanding may give consideration to both mechanical quality and driving texture. In terms of product planning, Leopard 3 should be officially released at the end of this year or early next year, and the price is expected to be above 250,000.

There was a big surprise in the egg part of this conference, that is, the appearance of SUPER 9, a two-compartment car without a roof. At present, it is also a concept car. As for the name of the later production version, it has not been announced yet, and it may be called Leopard 9. The new car is designed with a suspended double-wing door, with a low body and nine air ducts, which creates a good sense of performance. The headlight group is very sharp, and the rear taillight adopts the design elements of the equation leopard logo. The wheel adopts a nine-spoke hub with central locking. In the interior part, there are some design elements of the space capsule. The framework of the instrument panel in the car is made of carbon fiber, and the suspended large screen is combined with the leather and metal texture in the car, which has a sense of science and technology and is not short of mechanical elements. The lightweight seat with carbon fiber skeleton is really critical for a Speerster sports car. In terms of product planning, the new car will be officially released in 2025, and there is not much information about the price. However, from this shape and materials, guessing may be more expensive than looking up at U9.

After the press conference, Xiong Tianbo, general manager of Equation Leopard Auto, also appeared in the live broadcast room of Equation Leopard Friends, and exchanged views with you on the design, technology and products of the models unveiled at the press conference. According to Xiong Tianbo, the Equation Leopard sports car line has been completely planned. Personally, I guess that more than one sports car may be launched in the future. Regarding SUPER 9, the production model will largely continue the design of the concept car. Regarding SUPER 3, in addition to drones, future production models may have more playable configurations. Regarding the sales of Leopard 5, Xiong Tianbo said that the order performance is still very strong.

In the end, the spring conference of Equation Leopard really brought a lot of futuristic new car design ideas, which is in line with the positioning of Equation Leopard’s professional personalized brand. Personally, I still expect the production versions of SUPER 3 and SUPER 9 to be launched earlier. I don’t know what you think of the launch conference of BYD, where the whole family of Equation Leopard presented their gifts. # Equation Leopard Britney Spears Appears in Leopard Friends Live Room #

Original Ma Xiangyu Independent Fish Movie

It is said that domestic martial arts have declined.

The reason is simple, there is no successor.

After the death of Jin Yong’s pen-sealing Gu Long, its heyday was gone.

The most popular martial arts works on the market, whether literature or film and television, are under their shadow.

However, in recent years, a novel has emerged, which makes people feel the true rivers and lakes and the true martial arts.

So that since the announcement of film and television three years ago, it has been receiving much attention.

Some people are worried that it will be smashed and the original work will be destroyed;

Some people can’t wait to stay up late to brush the drama.

This is the one that just started broadcasting-

The Legend of Fei

The original work "There are bandits" has a very high popularity and reputation.

Douban score is as high as 8.8, which is rare in similar works.

Adapted into film and television, it is naturally sought after.

It’s a hot search reservation for several days in a row.

Zhao Liying plays the heroine Zhou Fei.

This is her latest work after "Know No" after two years.

YiBo, as the male host Xie Yun.

This is another costume drama after The Untamed.

There are also new generation actors such as Zhang Huiwen, Chen Ruoxuan and Kyulkyung;

And Hu Bing, Geng Le, Che Xiao and other powerful actors from Mesozoic era joined in.

Especially when I saw Dong Xuan and Zheng Xiaodong, many netizens called Ye Qinghui directly, and "the plain question and the breeze continued for a while."

The director is Wu Jinyuan from Hongkong, who is a good hand at filming costume dramas.

You may be unfamiliar with this name, but you must have seen his masterpiece-

The Legend of the Sword and the Chivalrous Man, The Chivalrous Man and the Plum, The Search for Qin … are all classics.

The most attractive part of the original work is the structure of the world outlook and a new interpretation of the rivers and lakes.

When the characters are visualized, the mighty rivers and lakes will be presented more intuitively.

There are disasters and wars in the rivers and lakes.

In order to shelter innocent people, old and young who were injured in the war.

Zhou Fei’s grandfather (Hu Bing) retreated to the border of Hunan and built a cottage.

This stronghold is formed by forty-eight sects in the Jianghu, and it is called Forty-eight Village.

Isolated from the world, Zhong Ling is beautiful, and everyone lives and works here.

Many years later, the position of the master of the cottage was passed on to his daughter, that is, Zhou Fei’s mother (Che Xiao).

The boss is a tiger mother, very strict.

Even if Zhou Fei (Zhao Liying) is talented, he is the best martial arts among the younger generation in the village.

And I never praised her.

Being left out in the cold since childhood, Zhou Fei was grumpy and aggressive when he grew up.

What she didn’t know was that the reason why her mother did this was to better temper her.

My mother knows very well that Forty-eight Villages can’t be a safe haven for Zhou Fei’s life.

I just didn’t expect that this day came earlier than I thought.

Before Zhou Fei left the stockade, her mother taught her the unique skill "snow-breaking knife":

"You look good, I only teach it once. If I ask again later, I don’t know when I have leisure time. 」

Although Zhou Fei doesn’t have the ability to never forget anything, he only caught the key after reading it once.

As a martial arts drama, the link of "martial arts" cannot be vague.

The Legend of Fei’s action design and martial arts scenes are worth mentioning.

Weitao Chen, a famous Hong Kong martial arts instructor, was invited.

The martial arts movements in the works such as Legend of the Sword and the Chivalrous Man, Painted Skin and Double Pride are all from his hands.

The movements he designed are changeable in style, which can be hard to bridge and hard to horse, but smart and elegant to retreat.

The VIA used by the main character in the play can be rotated 360 degrees.

You can also make all kinds of difficult movements in the air.

Weitao Chen’s sword drawing action designed for the role of Zhou Fei is drawn from the side.

This will give her a head start in the fight.

Originally, I was worried that Zhao Liying was not strong enough to do this action well.

When I arrived at the scene, I found this worry completely unnecessary.

Every blade-swinging action is well organized and can control the body well.

YiBo has the basic skills of hip-hop and motorcycle, so he is also adept at lifting Weiya to complete his movements.

The difference between The Legend of Fei and traditional martial arts is that women are no longer regarded as the foil of Jianghu.

It is a female martial arts.

It can be regarded as the growth history of a generation of female Xia.

Growth runs through the whole play.

The first lesson of Zhou Fei’s growth was what she learned from her father: parting.

This starts with the man Xie Yun (played by YiBo) breaking into the Forty-eighth Village.

Entrusted by others, he came to see Zhou Fei’s father, Zhou Yitang.

I hope to ask him to come out of the mountain again and sit in Anping Army.

Zhou Yitang retired from the Jianghu long ago and settled in the cottage with his wife and daughter, but he decided to leave for the sake of national justice.

Zhou Fei wanted to go down the mountain with his father and stay with him to protect him.

But I found that my martial arts were limited and I couldn’t even protect myself.

For her father’s departure, Zhou Fei was reluctant, but she also learned to accept the difference.

And people grow up in separation.

After half a year, Zhou Fei’s martial arts became more refined.

Challenge the tractor array again, and then passed the test of Xiushantang, and won the opportunity to go down the mountain.

On the mountain, under the mountain, outside the village, there are two worlds.

A magnificent picture of rivers and lakes begins.

Just then, a task fell on her head.

Many Wulin people disappeared in secret, including the people of Forty-eight Villages.

It turned out that the second owner of Huojiabao distributed heroic posts under the guise of birthday.

Then imprison the Wulin people who came to the underground dungeon and force them to join Huojiabao and recognize him as the leader.

Zhou Fei accidentally fell into the black prison of Huojiabao by mistake.

I didn’t expect to meet Xie Yun here after a long time.

At the beginning, Xie Yun felt guilty.

He thinks it is because of himself that Zhou Fei’s father and daughter are separated.

But now is not the time to catch up.

Zhou Fei has more important things to do-

Try to save the people who are under house arrest in the black prison of Huojiabao.

The first time I went down the mountain, I had zero experience in Jianghu, but I was carrying such a heavy responsibility.

Zhou Fei can only rely on intuition.

Steal the antidote and detoxify everyone.

Xie Yun found that there was black powder in Huojiabao, which could explode at any time.

He advised Zhou Fei not to mind his own business: "Which is more important, life or confession?". 」

Zhou Fei said categorically, "It is important to explain. 」

This is another lesson in Zhou Fei’s growth: a promise is made, and mountains are unimpeded.

She didn’t forget the mission of this trip down the mountain, that is, to give an account to Forty-eight Villages.

Commitment is more important than life, so we are willing to give our lives.

In the end, Zhou Fei and Xie Yun successfully rescued the imprisoned Wulin people.

After the Battle of Huojiabao, the two became friends of life and death.

For Zhou Fei, the first pass down the mountain was well done.

But she was not happy about it.

Because seeing the world at the foot of the mountain, people are in dire straits.

She said to Xie Yun:

"I didn’t expect the world at the foot of the mountain to be like this. Yesterday, I was still frustrated that I was too far from the strong. Today, when I entered the city, I saw so many refugees leaving home. Alas, this world is beyond the control of warriors. 」

This is probably the meaning of growth:

Compared with overcoming external difficulties, inner awakening and transformation are more precious.

The beginning mentioned the decline of martial arts.

In addition to the absence of Jin Yong’s Gu Long, there is actually another reason:

In this way, the fantasy-fixing mode has been upgraded to seize the market, and the chivalrous culture has lost its roots.

This era emphasizes "being yourself" more than "being a hero".

Young people are forced by life to become plain laymen, trying to live tactfully, while the latter gives people a feeling of naivety.

It seems that we haven’t seen the heroic chivalry between the streets and the unrestrained elegance between the mountains and rivers for a long time.

What The Legend of Fei has built is still the distant Jianghu.

What is unique is that a female character is chosen as the protagonist.

The rivers and lakes are stormy, and Zhou Fei, who was once carefree, was forced to get involved.

The audience followed her to wander the rivers and lakes, and they learned from each other.

Witnessed that Zhou Fei grew up from a novice in the Jianghu and eventually became a respected woman.

There are hills and valleys in the chest, which immediately shake the mountains and rivers, and there is no shortage of tenderness, demure and dignified.

Then through Zhou Fei’s growth, he brought out the common growth of other characters around him.

They are a group of people who represent the young power in the Jianghu.

Xie Yun once said to Zhou Fei, "Jianghu needs a successor, so you are born. 」

Just like a flower dies, there is always a glory.

A new generation of people in the Jianghu have grown up, and they want to keep the flowers blooming.

In the process of growing up, Zhou Fei and Xie Yun naturally developed love.

CP was not deliberately formed in order to force sugar distribution.

This feeling, it is natural.

And what they have been searching for all their lives is nothing more than the true meaning of the word "Xia".

As early as when Zhou Fei went down the mountain to kill the first person, she was deeply aware of:

Knives can kill people as well as save people.

One thought is good, and the other is evil.

No matter how advanced the martial arts are, it is useless to be invincible if you lose your chivalrous heart.

"I just know today, the word hero, what a mission. 」

The so-called "Xia" is not about how many people he defeated, but about how many people he saved.

The real strength lies not in Wen Cheng, nor in military skill, but in the heart.

As early as before the mountain, my mother said to Zhou Fei:

"Ghosts and gods are outside Liuhe, and people walk in the world. Why can’t you believe that this knife in your hand can be invincible? 」

Jianghu is not just about fighting and killing, blood shed.

Jianghu is a journey, but also a growth.

And the ending of growing up, at the beginning of the first episode, has been written down:

"One day, you will cross the silent Mojiang River and leave the old paradise surrounded by mountains.

You will witness countless insurmountable mountains toppling one after another, and the insurmountable sea drying up into fields.

Your fate hangs on the tip of the knife, and the tip of the knife must move forward forever. 」

This is probably the charm of martial arts.

And our time needs, pure domestic martial arts.

The full text is over.

Original title: "Long time no see, domestic martial arts"

Read the original text

On December 18th, Chongqing Changan Automobile Co., Ltd. issued an announcement on the disposal of land and house assets of Yubei factory and the signing of the expropriation agreement. According to the announcement, Changan Automobile intends to sign the Agreement on Expropriation of Houses on State-owned Land in Yubei District of Chongqing with the Housing Construction Committee of Yubei District. It is estimated that the total amount of compensation for this expropriation is RMB 2,558.18 million, and the final compensation amount is subject to the expropriation agreement formally signed by both parties.

Due to the need of public interest, according to the Regulations on Expropriation and Compensation of Houses on State-owned Land, Regulations on Expropriation and Compensation of Houses on State-owned Land in Chongqing and Detailed Rules for the Implementation of Regulations on Expropriation and Compensation of Houses on State-owned Land in Chongqing, the People’s Government of Yubei District of Chongqing plans to expropriate the land, overground houses and related ancillary assets of Chongqing Changan Automobile Co., Ltd. (hereinafter referred to as "Changan Automobile") located at No.579 Airport Avenue in Yubei District of Chongqing. The expropriation department is housing and urban and rural construction in Yubei District of Chongqing.

Changan Automobile held the 33rd meeting of the 9th Board of Directors on December 17th, 2024, and deliberated and passed the Proposal on Disposal of Land and House Assets of Yubei Factory and Signing the Expropriation Agreement, agreeing that the Company and the Housing Construction Committee of Yubei District should sign the above agreement.

It is reported that the assets expropriated this time are the land, above-ground houses and related ancillary assets of Changan Automobile located at No.579 Airport Avenue, Yubei District, Chongqing. There are 100 assets in total, of which the building area is about 239,800 square meters, the plot ratio is less than 1 and the land use right area is about 212,300 square meters. By the end of October 2024, the original book value of assets was about 714.79 million yuan, the net book value was about 267.91 million yuan, and the provision for impairment was about 30,000 yuan, with a book value of about 267.88 million yuan.

Chongqing Wanhe Assets Appraisal Real Estate and Land Appraisal Co., Ltd., a third-party agency, was entrusted by the Housing Construction Committee of Yubei District to appraise the expropriated land, overground houses and related affiliated assets. According to the Assets Pre-Appraisal Report (H.W.H.Y. (Chu) 2024 Zi No.002), taking November 21st, 2024 as the base date, the appraisal results of the structures to be expropriated this time were taken as the appraisal conclusion, and the pre-appraisal value was about 49.89 million yuan. According to the Report on Pre-evaluation of Real Estate Appraisal (H.W.H.F.Z. Pre-evaluation (2024) No.005), taking November 21st, 2024 as the base date, the appraisal result of the house to be expropriated this time is based on the income method, and the appraisal result of the land to be expropriated is based on the market comparison method, with a total pre-evaluation value of about 1,963.93 million yuan. The final evaluation value is subject to the official report issued by the third party organization.

The compensation collected this time is a comprehensive compensation fee, totaling 2,558,179,368.29 yuan. Comprehensive compensation fees include housing value compensation fees, single-family early signing incentive fees, guidance incentive fees, single-family scheduled relocation incentive fees, facilities and equipment compensation fees, loss compensation fees for production and business suspension, decoration compensation fees, etc.

　　On November 14th, Yin Tongyue (front left), Chairman and General Manager of Chery Automobile Co., Ltd., shook hands with Chairman of the Board of Directors of Chery Rongchuang Group in Thailand after signing the contract. On the same day, Chery Company and Thailand Rongchuang Co., Ltd. held a cooperation signing ceremony at Daoxianglou Hotel in Hefei, Anhui Province, which marked the official landing of Chery Automobile in the Thai market. The initial annual output of Thailand Chery Rongchuang Co., Ltd. is expected to reach 5,000 vehicles, mainly selling Chery QQ and Tiggo. Xinhua News Agency reporter Chen Yuhua photo

　　Xinhua Net Hefei, November 16 (Reporter Chen Yehua) Chery Company and Thailand Chery Rongchuang Co., Ltd. held a cooperation signing ceremony at Daoxianglou Hotel in Hefei on the 14th, and Chery Automobile will be sold in Thailand and other Southeast Asian markets in the form of semi-assembled parts (SKD).

　　According to the agreement, Thailand Chery Rongchuang Co., Ltd. will be the exclusive agent of Chery in Thailand, assemble and produce Chery cars in SKD form, and sell them in Thailand and other Southeast Asian markets under the Chery brand. The company’s initial annual output is expected to reach 5,000 vehicles, mainly selling Chery QQ and Tiggo.

　　Thailand is the largest automobile production and export base in Southeast Asia, and almost all world-renowned automobile manufacturers have factories in Thailand. Thailand Chery Rongchuang Co., Ltd. is a joint venture between Thailand Zhengda Group and Rongchuang Group.

　　It is understood that Chery has established eight factories in seven countries including Russia, Ukraine, Iran, Egypt and Uruguay, forming an overseas production capacity of 150,000 vehicles. Yin Tongyue, chairman and general manager of Chery Automobile Co., Ltd. said: "We plan to have 14 overseas factories and 400,000 overseas sales by 2010, which will greatly enhance the international competitiveness and brand influence of Chery Automobile."

Editor: Jufu

　　Can the capital increase of 800 million yuan help Tengshi, which has suffered losses for many years, enter the blue ocean of new energy vehicle market?

　　Text: Yun Zhu

　　Recently, BYD Co., Ltd. (002594.SZ, referred to as "BYD") announced that it and Daimler Greater China Investment Co., Ltd. (referred to as "Daimler") each increased their capital by 400 million yuan to the joint venture company Shenzhen Tengshi New Energy Automobile Co., Ltd. (referred to as "Tengshi"). So far, Tengshi’s registered capital has increased from 3.36 billion yuan to 4.16 billion yuan, and the shareholding ratio of both shareholders is still 50: 50.

　　As soon as the news came out, there were mixed opinions about Tengshi Automobile’s capital increase of 800 million yuan. Some people thought that this 800 million yuan was Tengshi Automobile’s "life-sustaining money", while others thought that 800 million yuan was not enough for Tengshi to continue to "burn".

　　Both Tengshi Automobile and BYD said in reply to the interview with Business School that through this capital increase, Daimler and Biyatong jointly promoted the upgrade of Tengshi products and services and the expansion of sales and service networks.

　　Tengshi Automobile, established in 2011, is a high-end new energy automobile brand jointly established by BYD and Daimler. Seven years after the Chinese New Year, the development of new energy vehicles in China is in full swing, and Tengshi Automobile is still losing money. When Tengshi really enters the blue ocean of new energy vehicles and realizes profit, it has become the focus of the industry.

　　Ungrounded?

　　It is an indisputable fact that Tengshi Automobile has been losing money. "Business School" reporters checked the sales and financial situation of Tengshi Automobile in the past three years. According to the data, the sales volume of Tengshi Automobile in 2015 was 2,888, in 2016 it was 2,287, and in 2017 it was 4,713. Financially, from 2015 to 2017, Tengshi Automobile lost 570 million yuan, 1.3 billion yuan and 480 million yuan respectively, with a total loss of 2.61 billion yuan.

　　From 2015 to 2017, it was the three years of rapid development of new energy vehicles in China. According to the statistics from China Automobile Association, in 2015, the cumulative sales of new energy vehicles in China was 330,000, in 2016, the sales exceeded 500,000, and in 2017, it was 777,000, which can be said to be "step by step".

　　Compared with the sales volume of the whole new energy vehicle, it is not difficult to find that Tengshi did not enjoy the dividend of the rapid growth of China’s new energy market. Tengshi replied to the reporter: "Tengshi’s products have not only undergone rigorous experimental verification and testing, but also withstood the market test in the fierce market environment. Through market practice, Tengshi has accumulated a large amount of product data and rich experience, which has made sufficient preparations for the development of the new energy automobile industry in the next stage. With the implementation of the national new energy vehicle strategy, Tengshi has taken the lead. While providing consumers with a new green travel experience, it has promoted the development of the pure electric vehicle market in China with practical actions. "

　　Indeed, Tengshi is one of the pioneers of new energy vehicles in China. However, when the new energy vehicles are excellent, the sales performance of Tengshi vehicles is mediocre. Zhang Xiang, an independent automobile consultant, admitted to the reporter that in the past few years, due to the immaturity of battery technology and new energy vehicle manufacturing technology, the rapid growth of new energy vehicles was mainly concentrated in the A0 and A market segments.

　　Tengshi Automobile has been positioned as a high-end vehicle since its birth. In 2016, the price of Tengshi 300 was 369,000-399,000 yuan. If it is purchased in Beijing and enjoys state subsidies and local subsidies, the price will be around 250,000 yuan. At that time, BYD, Jianghuai, Beiqi New Energy and other manufacturers launched new energy vehicles, and the subsidized price was around 100,000 yuan. Most car owners buy new energy vehicles in order to "occupy the number" and "be a spare tire". Positioning the high-end makes Tengshi "ungrounded" and the sales performance is flat.

　　Zhang Xiang believes that with the maturity of new energy vehicle technology and the expansion of the market, consumers have put forward higher requirements for new energy vehicles, and the development of B-class vehicles and SUVs is the general trend. "The price of Tengshi was a little expensive before, and it was close to the price of Tess." Zhang Xiang said.

　　An industry insider who didn’t want to be named visited Tengshi many times. He told the reporter of Business School that Tengshi needs further improvement in human-machine interface, car entertainment and car networking design. For example, during his visit to the store, he found that the salesperson did not know how to monitor the battery status with the mobile App, or the traditional sales logic.

　　When will the break-even line of 200,000 vehicles break?

　　In recent years, new brands in China automobile market have emerged constantly, with ups and downs, and many people have sweated for the new forces of making cars. However, Tengshi Automobile is backed by Daimler and BYD, and it is not "starting from zero" in terms of vehicle development, battery technology and supporting supply chain. Why can’t it escape the "curse" of loss?

　　Zhang Xiang believes that the general law of the whole automobile manufacturing, whether it is a traditional automobile or a new force to build a car, can’t be broken. "The automobile industry is suitable for the law of economies of scale. An automobile manufacturer has accumulated more than 200,000 vehicles before it has economies of scale. After all, it takes a lot of money to build a production line, build four major processes, set up a sales network, and develop products. If the sales volume does not reach 200,000 vehicles, it will always be a loss. “

　　In fact, Tesla, as the representative of the new car-making force, has sold more than 250,000 cars, but this "curse" has not been broken. "In the early stage, Tesla sold one car and lost another, relying on Wall Street to continue investing to survive. After more than 200,000 sales, the financial situation is still not optimistic. "Zhang Xiang said.

　　And the founders of a group of new forces that build cars have always said that building cars is a matter of burning money.

　　"Building a car requires ingenuity, and building a smart car costs money in the first three years. It is impossible to have enough financing in the first three years. I think that even a team with great experience in industry R&D and supply chain will need at least 20 billion yuan to burn the company with products listed and cash income." Shen Hui, founder of Weimar Automobile, said.

　　"Building a car is a very expensive thing, so if a startup wants to build a car, it needs at least 20 billion yuan to prepare, otherwise it will not be done well." Li Bin, founder of Weilai Automobile, once said.

　　At present, Daimler and BYD have invested a total of 4.16 billion yuan in Tengshi. According to the reporter’s rough statistics, Weimar Automobile has accumulated more than 6.6 billion yuan, Xpeng Motors has more than 5 billion yuan, Weilai Automobile has accumulated 14.6 billion yuan in the first five rounds of financing, and LeTV has accumulated 11.3 billion yuan …

　　Although Tengshi is not the highest amount of financing among all the cars, it is obvious that Tengshi’s existing funds are stretched, and it needs "blood transfusion" in the future.

　　"Building a car can’t be done overnight. The automobile industry needs continuous high-input characteristics, which is doomed to be a long-term goal. However, the front load of profit must be based on taking consumers as the core and ensuring the quality of brands and products. In the future, Tengshi will continue to promote the development of new energy vehicles in China with the help of high-quality resources of both shareholders, so that more China consumers can enjoy the green travel brought by Tengshi. " Tengshi said.

　　BYD told reporters that Tengshi’s shareholders have always been willing to provide financial, technical and talent support for its development. This capital increase once again shows Daimler and BYD’s optimism about China’s new energy market, and also recognizes Tengshi’s brand development potential, and releases their confidence in Tengshi’s long-term development to the outside world.

　　In recent years, new forces of car-making have emerged. After visiting auto china in 2018, Shen Jun, managing director of Accenture Strategy, told the reporter of Business School that the biggest change of this year’s auto show was that a number of "PPT" cars were produced in mass production. It can be seen that the market structure has changed. In the field of high-end new energy vehicles, Tesla may be the only competitor in the past, but in 2018, there will be a wave of new competitors, including Weilai, and high-end new energy vehicles launched by traditional automobile manufacturers. "Tengshi welcomes more peers to join this industry, and only more enterprises can better promote the development of China’s electric vehicle industry." Tengshi said.

　　Zhong Shi, a well-known commentator in the automobile industry, believes that whether a car company can make a profit depends on the third car. The first car will become a brand, the second car will consolidate its advantages and test the market heat, and the third car will be mass-produced. Tengshi adopts an "iterative" approach. At present, Tengshi 500 is listed, which is its third car. Facing many new entrants, Tengshi has also entered a critical period that determines success or failure.

　　Start the marketing war

　　According to the announcement, the capital increase of Tengshi shareholders is mainly used for personnel expenses, market advertising expenses, payment of goods to suppliers, repayment of bank principal and interest expenses, vehicle purchase, battery upgrade and testing, and construction of service network.

　　Previously, Tengshi Automobile left a relatively low-key impression on reporters, and there were not many marketing advertisements exposed. In terms of sales network, Tengshi has not many sales outlets, but many prospective car owners have found that Tengshi has been selling at the same store in Mercedes-Benz’s 4S shop.

　　In the retail industry, many small brands often spend a lot of money to live next to luxury brands in order to gain more attention and attention. MK, Coach and other luxury brands have achieved rapid growth in this way.

　　In the automobile retail industry, Tengshi did not "live next to" Mercedes-Benz, but moved directly to Mercedes-Benz’s 4S shop, which on the one hand can expand the terminal quickly and at low cost, so that consumers can contact Tengshi’s products very conveniently; On the other hand, it can enhance Tengshi’s brand awareness and influence, because Mercedes-Benz is one of the most typical representatives of luxury cars.

　　This original intention is good, but Zhang Xiang observed that Tengshi was with Mercedes-Benz and thought that users would think Tengshi was a luxury new energy vehicle, which was acceptable, but not many people paid the bill in terms of sales volume.

　　In addition, in terms of charging pile facilities, Zhang Xiang believes that Tengshi is not as heavily invested as Tesla. At present, the number is not particularly large. The charging pile with Tengshi logo is not open to social new energy vehicles. On one occasion, he charged Tengshi on a public charging pile, and there was also a situation in which the power did not increase but decreased after charging.

　　Next, Tengshi will greatly expand its sales network. Tengshi is inextricably linked with BYD. At present, the general trend of the whole automobile industry in China is "self-improvement". Like Geely, Chang ‘an and Great Wall, BYD is also developing high-end products. Will BYD and Tengshi have the problem of "fighting each other"?

　　In BYD’s view, the positioning of the two brands is different. BYD relies on self-produced Chinese products to form brand radiation. Under BYD’s main body, Tengshi will focus on the demand of China consumers, focus on the research and development of electric vehicle technology, and constantly develop new energy vehicles with environmental protection, energy saving, safety and comfort, and excellent quality. BYD believes that China’s high-end new energy vehicle market is still a blue ocean.

　　Now Tengshi’s problem is how to enter this blue ocean as soon as possible through the continuous improvement of product strength and brand strength.

At noon on February 22,The krypton car accidentallyOn social mediaThe publicity map of competitor Weilai Automobile was used to promote its pure electric luxury car Krypton 007, which caused extensive discussion.

This incident has greatly increased the discussion of extremely krypton cars among netizens.."The happiness of extremely krypton ET7, you can understand it when you open it",“Xiaobian, do you want to see which car picture is used?"and other comments.Quickly raised the heat of krypton.

The official micro-official subsequently issued a response saying that the editor of the Oolong Department made a mistake and copied the original text 10,000 times.

The day before the social media Oolong incident of Krypton Auto, Krypton officials just celebrated the milestone that the sales of its flagship model 007 exceeded 10,000 vehicles. It took only 56 days for this model to achieve this achievement since it went on the market, so it was extremely confident that its 007 model was crowned as "the king of pure electric cars" and "no short board".

Krypton is currently beingMore attention is paid to the upcoming new Krypton 001 model. It is reported that the new polar krypton 001 will be unveiled on February 27th. Although the appearance has not changed much, the details are mainly adjusted, such as the triangular design under the front bumper, the duckling tail at the tail to enhance the sense of strength, and the triangular design in the fog light area, etc., but the configuration will usher in a comprehensive upgrade.

Highlights of the new car include the adoption of 800V high-voltage platform technology, the configuration of Qualcomm Snapdragon 8295 chip and the 35.5-inch AR-HUD head-up display technology, which is expected to greatly enhance the user experience. In addition, the new 001 may also be equipped with high-end configurations such as dual-cavity air suspension, further strengthening its market position of luxury electric vehicles.

In social media marketing, this mistake of Krypton has undoubtedly aroused widespread concern and discussion. Although this marketing method may attractreproachHowever, it is undeniable that it has effectively enhanced the brand’s popularity.Critics believe that,This incident reflects that Krypton does not hesitate to take marginalized measures in marketing strategy to trigger public discussion and thus achieve the purpose of enhancing brand awareness.

With the upcoming release of the new 001, Krypton seems to be telling everyone in this slightly cold and humorous way: in the race of speed and passion of electric vehicles, even a casual "hand slip" may become an opportunity to seize the headlines. Although this strategy may bring a double-edged sword effect..

But at least for now,The results prove the effectiveness of this hand-sliding. After the incident, Krypton quickly boarded the hot search.

The new car is built on the BMW clar platform. In terms of appearance, the front face of the new car adopts a large-size kidney grille, and the headlights on both sides have sharp lines, and there is also a three-stage air intake below. On the side of the car body, the lines on the side of the new car body are smooth, and the multi-spoke wheel hub design shows a good sporty atmosphere. At the rear of the car, the new car adopts the design style of sliding back, and adopts the exhaust layout of bilateral single outlet.

Our interior design is also biased towards luxury, with a strong sense of design, taking into account the sense of technology and practicality. The addition of full LCD instrument and large-size central control LCD screen meets the domestic consumers’ pursuit for configuration. The interior material uses a lot of leather and metal, and the sense of luxury and atmosphere on the senses is extremely in place.

The length, width and height are 5170×2000×1835mm respectively, and the wheelbase has reached 3105 mm. In the same class, the wheelbase of BMW X7 ranks 21st. One bright spot is that its width reaches 2000mm, which reflects that the horizontal space inside the car is not bad. The design of skylight also increases the subjective space feeling of front and rear passengers. Among the models of the same price and class, the trunk volume of BMW X7 ranks 154th. The storage space in the car is quite satisfactory and basically sufficient. The interior space of the luggage compartment is relatively regular, with very good longitudinal depth and high expansibility, and the space performance is generally ideal.

BMW X7xDrive M60i uses a 4.4 engine, with a maximum horsepower of 530 and a peak torque of 750, matching the automatic manual transmission (AT). It will definitely bring unforgettable control charm. The official measured acceleration of BMW X7 is 4.7S, ranking 92nd among SUV models with more than 800,000.

The active/passive safety configuration of BMW X7 is complete, includingAutomatic parking、Zero tire pressure endurance tire、Automatic parking、Steep slope descent、hill start assist control、knee airbag、HUD head-up display、Anti-lock braking (ABS)、Braking force distribution (EBD/CBC, etc.)、Brake assist (EBA/BAS, etc.)、Traction control (ASR/TCS, etc.)、Active noise reduction、Engine start and stop、Side safety air curtain、Wireless charging of mobile phone、night vision system、LED daytime running lights、Forward reversing radar、Tire pressure monitoring、Steering wheel heating、Body stability control (ESP/DSC, etc.)、Rear reversing radar、Fatigue reminder、Remote parking、Child seat interface、Lane keeping (LKAS)Equal configuration.

Among them,Automatic parkingYou can avoid stepping on the brakes for a long time or needing to pull frequently;Steep slope descentCan safely pass through steep slope road conditions at low speed;knee airbagReduce the injury of the car interior to the occupant’s knees in the secondary collision.

If the above data and participation can’t fully understand BMW X7, then we can give you a more comprehensive reference based on the word-of-mouth information of users who have bought BMW X7 in history. It can be seen that what everyone is most satisfied with BMW X7 is its sharp front face. In addition, the car’s favorite and really good interior are also the points that everyone likes it.

Just one year later, the iCAR brand has once again ushered in rejuvenation, from product design, product positioning, to all VI vision and brand slogans, which Chery calls "brand upgrading".

On April 16th last year, Chery officially released its fourth brand "iCAR". At that time, iCAR showed its first brand-new pure electric SUV-icar03, and unveiled a concept car iCAR GT, and even specially launched an "I" logo designed by jigsaw puzzle.

At that time, there was a feeling in the whole press conference that Chery, who lives in Wuhu, wanted to build a new energy brand for the young market. The perception of this brand was still a bit "rustic" and there was a feeling that "the science man pretended to be a hipster".

ICAR brand was promoted step by step last year, and iCAR 03 was officially listed at the beginning of this year after a year of preheating. Although the sales volume of iCAR 03 has now exceeded 8,000 vehicles, the volume of the market and the popularity among young consumers are not high.

The turning point of events occurred on March 30th this year-which happened to be the third day when Xiaomi SU7 was listed-Su Jun, CEO of Zhimi Technology, posted a detailed picture of an off-road vehicle on social media, and the brand on it was written as "iCAR V23", which quickly attracted the attention of a small number of car enthusiasts.

Soon after, some media officially released the static live video of iCAR V23, and with a series of official maps released by the iCAR team, the whole social media was "chain detonated".

Young consumers wandering on social media quickly found this pure electric SUV that looks like the "mini version of the guardian" and has a classic hard-core off-road vehicle design style, and their eyes were quickly attracted by it. At that time, there were rumors that this car was the legendary "Redmi Automobile", which is the deputy brand of Xiaomi Automobile. With Su Jun’s certification as "CEO of Zhimi Technology", the term "Redmi Automobile" seems to be "traceable".

Soon, Zhimi Technology and Xiaomi issued separate articles, explaining that iCAR V23, Zhimi Technology CEO Su Jun, Zhimi Technology and Xiaomi Ecological Chain have no equity relationship, nor are they the so-called "millet ecological chain cars". However, these relationships show that the inclusion in the listing boom of Xiaomi SU7 quickly made the general public pay more attention to the relationship between iCAR and Xiaomi’s ecological chain, which further made iCAR V23 an instant hit and the iCAR brand re-entered the general public’s field of vision.

Until April 12, Chery iCAR brand night, Chery and Su Jun officially presented the brand-new iCAR brand in front of the stage, which gradually clarified the status quo of Chery iCAR brand.

Yin Tongyue, Party Secretary and Chairman of Chery Holding Group, defined iCAR as a "new special zone" created by Chery Group. He emphasized that Chery has no upper limit on its investment in the development of iCAR, and its goal is to help iCAR enter the first camp of new energy.

Another protagonist of the conference is Su Jun, CEO of Zhimi Technology. He is also the chief product officer of iCAR brand, which is regarded as the "joint leader" of iCAR brand. ICAR brand official said that Su Jun will lead the entrepreneurial team hatched by Zhimi Technology into the iCAR brand. He and his team will be responsible for industrial design, product definition and innovative marketing, while Chery will be responsible for technology development, supply chain and quality management capabilities.

The phrase "the entrepreneurial team hatched by Zhimi Technology" actually shows the new changes in the iCAR team.

According to the understanding of the driving school, the current iCAR brand is actually different from last year’s state and organizational structure. There are rumors that Su Jun originally led the internal team of Zhimi Technology to plan to build a car, which was manufactured by Chery. However, in the end, due to various reasons and decisions, the car-making team that originally belonged to Zhimi became independent and merged with the Chery iCAR brand.

At this point, Su Jun’s Xiaomi eco-chain car has also been integrated into the iCAR brand, and the design, marketing, public relations, engineering and other talents in the team have also merged with iCAR. This also formed the "special zone" model that Yin Tongyue said, which is equivalent to Chery’s semi-opening of the original iCAR brand and its integration with the external market-oriented team, instead of Chery’s overall leadership.

The biggest help for Chery here is that the V23 product originally built by Zhimi Incubation Team was directly incorporated into the iCAR brand, and with the planning of X25 model, the new iCAR brand was directly derived from the original iCAR 03 model to three models in a short time.

Not only is the product line expanded, but after the integration of the new team, the Logo, VI and even Slogan of the whole iCAR brand have been completely replaced.

One of the most prominent places is that the jigsaw puzzle I Logo created by the previous iCAR brand did not appear again at this new iCAR brand conference, and it was replaced by a newly designed iCAR logo. At the same time, including brand promotional videos, product animations, PPT speeches, etc., the new iCAR brand has more youthful and digital features that technology companies like Xiaomi were good at before. From the whole visual point of view, the brand has become more "foreign".

It can be said that these changes are the brand images of so many brands that Chery has built before-except perhaps Guanzhi-which have the most consumption characteristics of the new generation.

However, the core reason why Su Jun and Chery can reach an agreement on the iCAR brand is that the brand positioning of both old and new brands is to build cars for young consumers, and their products are built according to the needs of young users, creating cool and valuable cars for young people. Therefore, the iCAR brand night emphasized "upgrading iCAR brand" instead of appearing as a brand-new brand.

At this brand launch, Su Jun further revealed some information about the previously published iCAR V23 products, and also brought a brand-new series of products-X25.

Some new information about iCAR V23:

With a body length of about -4.2 meters and a wheelbase of 2730mm, you can choose 21-inch large wheels and off-road tires.

-At present, apart from silver, there are two car colors: olive green and Hermes orange, with corresponding interior colors;

-The car is designed with four large sofas, but it is actually a five-seat model. The rear central seat belt is stored on the roof, and the seat can be laid down at 50:50;

-The car system adopts 8155 chip, 2.5K high-definition large screen, 3D HMI based on unreal engine, supports wireless CarPlay, and the UI color tone is consistent with the orange decoration in the car;

-The assisted driving system uses an 8-megapixel forward-looking camera, a 3-megapixel panoramic camera and five millimeter-wave radars. The chip uses Horizon J3+ Qualcomm TDA4 to support L2++ intelligent driving including high-speed NOA;

-The new car will adopt 80-degree Contemporary Amperex Technology Co., Limited battery pack, dual-motor drive and intelligent dynamic torque distribution system;

About iCAR X25:

-This car is positioned as a ONEBOX off-road MPV. Since it is an MPV, it must have a three-row design;

-The length of the car body is about 4.4 meters, the wheelbase is estimated to be more than 2.9 meters, and there is also an exaggerated ground clearance;

-the whole design pursues low wind resistance, which is similar to the ideal MEGA； of mini off-road version;

-Full flat floor design can realize transparent interior space and flexible seat combination;

-The new rear door is designed with opposite doors, which is very interesting;

-The concept car uses a streaming rearview mirror, which may be cancelled in production models.

At the same time, iCAR has made it clear that iCAR will use an extended-range hybrid system, equipped with a range extender with a thermal efficiency of more than 44%, and also released a new car outline. It is reported that this model may be the iCAR 03 Pro version to be released at the Beijing Auto Show, which is the extended-range hybrid model of iCAR 03.

In short, after the upgrade of iCAR brand and team integration, the future iCAR brand will have three product lines: 0, V and X.

Among them, 0 series focuses on exquisite technology and pursues equal rights in science and technology;

V series features off-road style, emphasizing differentiation, high value and super practicality;

X series is committed to becoming a "new species of single-compartment car".

In addition, iCAR plans to launch eight models before 2026, becoming a brand with a youthful lifestyle label.

（END）

@ Jiading friends

A wave of new job opportunities is coming!

Constructing the integration of talent development and service in Jiakuntai

Promote the rational flow of talents in the region

Jiading District Autumn 2019 Large Job Fair

Will be held this Sunday (October 20).

Interested citizens, don’t miss it!

Holding time:

October 20, 2019 (Sunday, 8:30-12:00)

Venue:

Shanghai Jiading Stadium (No.118 Xincheng Road)

Schematic diagram of the venue:

This job fair has

More than 200 employers,

More than 1000 jobs,

Recruit more than 3000 people!

Hurry up and follow Xiaojia to get to know it ~

Job details

Jiading district participating units

1. Shanghai Ogilvy Gear Co., Ltd.

Maintenance engineers, machining center operators, draftsmen, clerks, CNC lathe operators, assemblers, process engineers, maintenance workers and quality inspectors.

2. Shanghai Dahong Industrial Co., Ltd.

Marketing personnel, agricultural technical management personnel, engineering technical personnel, quality and safety department management personnel, business department budget officer, office director.

3. Shanghai Xinzhi Precision Optics Co., Ltd.

Director of student management, assistant engineer, Japanese person in charge

4. Shanghai Yuding Power Technology Co., Ltd.

Clerk, reserve cadre, business back office, production management, quality assurance supervisor and engineering assistant.

5. Shanghai Anji Industrial Co., Ltd.

Equipment debugging engineer

6. Shanghai Huimin Biotechnology Co., Ltd.

Sales engineer, after-sales engineer, sales assistant clerk

7. Shanghai Ailin Environmental Technology Co., Ltd.

Senior financial supervisor, customer documentary

8. Shanghai Fengxiang Industry and Trade Co., Ltd.

Foreign trade salesman and financial supervisor

9. Hengchi Environmental Protection Equipment (Nanjing) Co., Ltd.

Sales assistant, sales

10. Shanghai Xuanen Technology Co., Ltd.

Warehouse keeper, electrical engineer, fitter, milling worker, wire cutter, fixture design apprentice, fixture designer.

11. Shanghai Chuangxin Enterprise Management Co., Ltd.

Foreign trade salesman and financial supervisor

12. Shanghai Fane Automobile Interior Trim Products Co., Ltd.

Customs declarant and quality section chief

13. Shanghai Mengluoshi Household Products Co., Ltd.

Quality manager, chemical experimenter, sales engineer, truck driver, general worker, warehouse leader, sales assistant.

14. Shanghai Shengshi Electronic Technology Co., Ltd.

Sales and refrigeration engineer

15. Shanghai Poly Theatre Management Co., Ltd.

Comprehensive maintenance, universal worker, stage mechanic, stage technical intern, field management intern, monitoring police officer, security police officer.

16. Shanxionghui Machinery Technology Development (Shanghai) Co., Ltd.

Sales specialist, Japanese business assistant, sales assistant

17. Beijing Zhonggong Education Technology Co., Ltd. Shanghai Jiading Branch

New Media Operations Specialist, Marketing Specialist, Guan Peisheng, Cadre/Supervisor Reserve, Learning Planner, Learning Manager.

18. Shanghai Jiabao Property Service Co., Ltd.

Engineering maintenance personnel, property customer service

19. Shanghai Jiwei Electromechanical Equipment Co., Ltd.

Administrative personnel, electricians and welders

20. Shanghai Changxiang Color Technology Co., Ltd.

General worker, assistant clerk of quality control, assistant of quality control

Shanghai Guobei Real Estate Co., Ltd.

Investment promotion specialist, electrical engineer, sales manager, property engineering manager and property general manager.

22. Shanghai Jiucheng Food Co., Ltd.

Meat cutter, cleaner, planner, production supervisor, purchasing clerk, order supervisor and cost supervisor.

23. Shanghai Changfan Trading Co., Ltd.

Technical support, sales assistant, sales engineer

24. Shanghai Zonggu Machinery Manufacturing Co., Ltd.

Driller, grinder, CNC lathe worker

25. Sinade Technology Co., Ltd.

Electrical engineer, purchasing, technical support, software engineer, sales representative, foreign trade and business.

Auchan (China) Investment Co., Ltd.

Artist, warehouse keeper, tallyman, trainee manager of commercial department

27. Shanghai Shengyuan Packaging Co., Ltd.

Sales assistant, corrugated board line foreman, technical drawing, printer

28. Shanghai Liju Elevator Parts Co., Ltd.

Quality inspector, office technician

29. Yida Ruite Stationery (Shanghai) Co., Ltd.

Financial assistant (fresh), operator, mechanic

30. Shanghai Yufeng Food Co., Ltd

On-site quality control, food chemist, cleaner in production workshop, cutter and baker.

31. Shanghai Chengfang Automatic Door Technology Co., Ltd.

General workers, quality inspectors, warehouse keepers, welders, producers, after-sales technicians, foreign trade salesmen and salespeople.

32. First Electronic Industry (Shanghai) Co., Ltd.

schoduler

33. Shanghai Xiangle Tamura Electrochemical Industry Co., Ltd.

Clerk, R&D engineer

34. Shanghai Zhendong Mold Co., Ltd.

Cleaner, canteen aunt, driver, purchasing, forging workshop & mold workshop maintainer, mechanic, forging workshop & mold workshop maintainer, electrician, mold programming, CNC machining center programming, operator, CNC machining center operator, polisher, assistant worker, punch press operator, forging worker, forging worker, mold lathe operator and mold fitter.

35. Shanghai Jiwang Electromechanical Technology Co., Ltd.

Personnel specialist, sales assistant, assembly specialist, sales engineer, mechanical engineer.

36. Shanghai Changsheng Auto Parts Co., Ltd.

Mold design, equipment engineer, inspector, injection molding technician

37. Shanghai Sanyou Medical Devices Co., Ltd.

Orthopedic sales representative (Shanghai), mechanical design engineer, process engineer, production plan, quality engineer, manufacturing engineer (slitting), manufacturing engineer (machining center), slitting/machining center operator, channel specialist and general ledger accountant.

38. Shanghai Lin Qiu Machinery Co., Ltd.

Hydraulic assembler and hydraulic engineer

39. Shanghai Xiacheng Environmental Health Service Co., Ltd.

Automobile maintenance management and administration management

40. Shanghai Aolin Auto Parts Co., Ltd.

General worker, mechanic electrician, administrative Commissioner, checking fixture engineer, quality engineer, CMM surveyor, outsourced quality engineer and system engineer.

41. Shanghai Zhonghua Automobile Damping Material Co., Ltd.

Warehouse keeper, EPP technician, CNC machine tool worker, maintenance technician, machining process engineer.

42. Shanghai Jiebao King Enterprise Development Co., Ltd.

Maintenance manager, intelligent/security/weak current designer, cost engineer, intelligent/security maintenance engineer and commercial specialist.

43. Shanghai Zhenhua Bearing Factory Co., Ltd.

Product design engineer, product process engineer, metallographic analyst

44. Darren Yi Industrial Metal Manufacturing (Shanghai) Co., Ltd.

Purchasing assistant, production plan, quality supervisor, quality inspector

45. Shanghai Pepsi Food Co., Ltd.

QA, warehouse system operator, quality inspector, machine equipment operator and automation equipment operator.

Shanghai Hongji Metal Products Co., Ltd.

Guan Peisheng, warehouse keeper, apprentice, cold heading technician, quality inspector, quality engineer and production manager.

Shanghai Jiazheng Machinery Co., Ltd.

Mechanical design supervisor, after-sales service supervisor, planning engineer, warehouse leader, quality inspector, general worker, equipment maintenance, sales engineer, mechanical designer, after-sales maintenance mechanic.

Shanghai Fuyin Fluid Power Equipment Co., Ltd.

Electronic technician (can accept fresh graduates), electronic engineer, mechanical engineer, R&D manager, foreign trade development business, domestic trade development business and domestic trade supervisor.

49. Shanghai Geer Cunhao Machinery Manufacturing Co., Ltd.

Auto parts production technology management, inspector, CNC machine tool operator

50. Haijiahao Adhesive Products Co., Ltd.

Electromechanical/electrical maintenance technician, technical service engineer, financial accountant, foreign trade salesman, and foreign trade merchandiser.

51. Yijingyuan Photoelectricity (Shanghai) Co., Ltd.

Sales engineer, foreign trade assistant, architectural lighting designer, sales assistant, business manager, cashier.

52. Zhuoyue Fastening System (Shanghai) Co., Ltd.

Environmental engineers, inspectors, quality engineers, reserve cadres, operators, technical research and development engineers.

53. Weixiang Environmental Protection Technology Development (Shanghai) Co., Ltd.

Marketing assistant, hardware tester, statistical assistant, EHS Commissioner, intern, security guard

54. Shanghai Leyan Electric Co., Ltd

Salesman, standardization engineer, maintenance electrician/after-sales service, assistant mechanical engineer, mechanical engineer, electronic/hardware engineer, software engineer and process engineer.

55. Shanghai REP Electric Co., Ltd.

General worker, production clerk, draftsman, network marketing promotion specialist, injection foreman, foreign trade salesman.

56. Meijian Building System (China) Co., Ltd.

General workers/mechanics, welders/riveters, equipment/electrical engineers, quality inspectors, detail design engineers and reserve cadres.

57. Shanghai Agriculture, Industry and Commerce Changzheng Medicine Co., Ltd.

Network administrator, delivery driver, purchasing manager, OTC business manager, sales assistant, drug quality checker, drug inspector, warehouse keeper, drug quality administrator, accountant and chief financial officer.

58. Shanghai Feili Xuncheng Electric Technology Co., Ltd.

Intern, trainee, sales, mold maintenance worker, wire cutting, product engineer assistant, general manager secretary.

59. Shanghai Valve Factory Co., Ltd.

Forklift driver, inspector (welding), technical support engineer, maintenance electrician, process engineer, design engineer, assistant sales engineer, sales engineer, workshop clerk, numerical control operator and general vehicle operator.

60. Shanghai Yihe Valve Co., Ltd.

Machining center, CNC lathe operator, welder, salesman, purchasing, process assistant, process engineer, valve designer.

61. Shanghai Hotel Equipment Engineering Package Nanxiang Factory Co., Ltd.

General workers, electrical engineers, structural design engineers, after-sales maintenance workers, project installers, quality department clerks, after-sales customer service clerks, sales clerk interns (reserves), sales clerks, technician interns (reserves), and salesmen.

Shanghai Liancheng (Group) Co., Ltd.

Polishing, welder, truck, truck, thermal processing engineer, secondary water supply engineer.

63. Qiaoshan Fitness Equipment (Shanghai) Co., Ltd.

SQA, equipment maintenance technician, accountant, electrical system test engineer, IE engineer, embedded software engineer, motor drive hardware engineer.

64. Huayu Pierborg Anting (Shanghai) Nonferrous Parts Co., Ltd.

Mechanic, operator, melting and chemical industry

65. Shanghai Kaiquan Pump Industry (Group) Co., Ltd.

Technical support engineer, EHS supervisor, process engineer (machining), quality engineer, office assistant, personnel assistant and mechanic.

66. Huarong Technology Co., Ltd.

Maintenance electrician (direction of die casting machine), maintenance electrician (direction of CNC lathe), die casting worker, lathe worker, general worker, assembler, inspector, foreign trade salesman and mechanical technician.

67. Liqing Automotive Technology (Shanghai) Co., Ltd.

Product engineer, IT engineer, quality engineer, SMT engineer, SMT technician, management trainee/reserve cadre.

68. Jingjin Best Electric (Shanghai) Co., Ltd.

Wire cutting technician, equipment maintenance technician, gear grinder, machining operator, CNC lathe operator, CNC machining center technician and inspector.

69. Shanghai Zhongke Shenjiang Electric Vehicle Co., Ltd.

Solder, assembler, supplier quality supervisor, inspector, process engineer (electronics), production assistant, administrative assistant and front desk, purchasing engineer (electronics), purchasing engineer (MRO)

70. casma Automotive Systems (Shanghai) Co., Ltd.

Intern, mold repairman, maintenance electrician, quality of technicians, IT engineer, 2020 trainee, accountant, manufacturing engineer (die casting), die casting process engineer, die casting mold engineer and quality engineer.

Shanghai Stem Cell Technology Co., Ltd.

Clinical transplant representative, administrative Commissioner, consultant (Jiading Central Hospital), preparer, and minister of public relations.

72. The Eighth Institute of Nuclear Industry

Discipline inspection officer, office director, party committee office officer, human resource management, material technology research and development engineer, ceramic base material research and development engineer, automatic control design engineer, composite material structure design, automatic control or mechanical design.

73. Shanghai Zhongzhou Special Alloy Material Co., Ltd

Foreign trade salesman, laboratory technician, machining center operator, numerical control operator, finished product inspector.

74. 213 Electric Appliances (Shanghai) Co., Ltd.

Commercial administrator, quality inspector, project engineer

75. Shanghai Tianyong Intelligent Equipment Co., Ltd.

Milling machine, general lathe, three-coordinate surveyor, warehouse keeper, CNC operator, gantry machining center, grinder.

76. Shanghai Churong Testing Technology Co., Ltd.

Personnel Assistant, Sales Engineer, equipment manager, Reserve Engineer, Test Technician.

77. Shanghai Huaxun Auto Parts Co., Ltd.

Equipment manager, cleaning machine operator, assembler, deburring assistant, machining center operator, die casting process engineer.

78. Chuangyue Industry (Shanghai) Co., Ltd.

Design Assistant, Commissioner baidu promotion, Director of Sharing-Investment Promotion, Purchasing Manager, Customer Service Specialist, Operation Assistant, Administrative Personnel Assistant, Financial Assistant, Sales Assistant, Buyer/Purchasing Assistant.

79. Hengfengtai Precision Machinery Co., Ltd.

Foreign trade salesman, sales engineer, mixing/thickening scheme design engineer

80. Shanghai Fuhua High-tech Park Development Co., Ltd.

Installation engineer, investment promotion assistant, investment promotion specialist and civil engineer.

Shanghai Yangcheng Technology Co., Ltd.

Technician, lathe, business specialist, automatic control engineer, mechanical engineer, draftsman and software engineer.

82. Shanghai Tongzhou Auto Parts Co., Ltd.

Financial Assistant, Examiner, Tester, Technician, Welder

83. Shanghai Zunyou Automation Equipment Co., Ltd.

Assembly electrician, assembly fitter, CNC lathe operator, process engineer, quality engineer, electrical engineer and mechanical engineer.

Shanghai Sanjian Pharmaceutical Equipment Co., Ltd.

Bender, assembler, welder, electrical designer, electrical operator

85. Morimoto Lighting Co., Ltd

Deputy Assistant/Clerk, Deputy Marketing Manager

Shanghai Wufeng Shangshi Food Co., Ltd.

Marketing, electrical supervisor, information supervisor (IT operation and maintenance direction), refrigeration operator, refrigeration maintenance worker, quality inspector, contractor and sewage treatment worker.

87. Liwa Environmental Protection Technology (Shanghai) Co., Ltd.

Business manager, sales engineer/assistant engineer, business assistant, technical engineer

88. Shanghai Jiading Sub-branch of Postal Savings Bank of China Limited

Account managers and tellers

89. Shanghai Ake Electronic Machinery Manufacturing Co., Ltd.

Quality manager, new product development engineer, process engineer and customer quality engineer CQE Engineer.

90. Shanghai Louxing Tools Co., Ltd

Mechanical draftsman, 3D product design

91. Shanghai Yongxing Plastic Co., Ltd.

Software programming, electrical design, mechanical structure design, mechanical fitter, quality control, mold manufacturing.

92. Yinxin Industrial Technology (Shanghai) Co., Ltd.

Personnel supervisor, accountant, purchasing engineer, maintenance personnel, process engineer, mechanical design, electrical engineer.

Shanghai Agger Photosensitive Materials Co., Ltd.

Warehouse manager, project engineer, process engineer and equipment maintenance engineer

94. Shangshang Desheng Group Co., Ltd.

Regional manager, vice president of sales, software development engineer (JAVA), sales engineer.

95. Shanghai Aweite Precision Machinery Co., Ltd.

Intern (mechanical & numerical control major), project manager (machining), CNC engineer, three-coordinate programming engineer, warehouse keeper, production statistician, CNC operator, and CNC dispatcher.

96. Zhongke Guanghui (Shanghai) Technology Co., Ltd.

Embedded development engineer, hardware circuit engineer

97. Shanghai Baicheng Electric Appliance Co., Ltd.

Amazon platform e-commerce maintenance administrator, QE engineer, PIE craftsman (clerk), electronic engineer, general operator, foreign trade sales merchandiser and surveyor.

98. Changchun Guoke Precision Optics Technology Co., Ltd. Shanghai Branch

Software testing engineer, application software engineer, system integration technician, coating technician, logistics management, purchasing engineer, warehouse manager.

99. Haiwen Lida Technology Co., Ltd.

Assistant production clerk, R&D technical director, marketing director, sales representative and embedded hardware engineer.

100. Shanghai Keluge Ventilation Equipment Co., Ltd.

Electric welder (gas shielded welding), maintenance electrician, sales assistant engineer and technical assistant engineer.

101. Shanghai Kaimi Technology Co., Ltd.

Automatic control engineer, financial manager, buyer, quality manager, accountant.

102. Shanghai Zhongyuan Fuel Distributor Manufacturing Co., Ltd.

IT computer management, mechanic, equipment engineer, quality management, technician, project engineer.

103. Shanghai Daogu Automobile Precision Parts Co., Ltd.

Operator, Guan Peisheng, project engineer, quality supervisor, quality assistant/document control, quality engineer.

104. Shanghai Kangbo Electronics Co., Ltd.

Accounting clerk, MI team leader, repairman, electronic engineer, production team leader (working place: Kunshan), SMT production team leader, sales, FQC, IPQC, engineering technician.

105. Shanghai Guozhiding Railway Mechanical and Electrical Co., Ltd.

Warehouse assistant, machining center operator, personnel specialist, mechanical draftsman, quality engineer, valve design engineer.

106. Naichi (Shanghai) Machinery Instrument Co., Ltd.

Assembly fitter, sales engineer (pharmaceutical industry), sales engineer (food industry), dry sales engineer, after-sales service engineer, dry project technician, mechanical engineer.

107. Longkill Auto Parts (Shanghai) Co., Ltd.

Engineering/mechanical draftsman, process engineer, sales/development manager, Italian translator.

Shanghai Aerospace Electronics Co., Ltd.

Inspectors, test operators, radio assemblers, numerical control operators, fitters and test engineers.

109. Meigulong (Shanghai) Commercial Equipment Co., Ltd.

Guards/security guards, training supervisors of furniture stores, Chinese chefs, foreign trade sales (Japanese), foreign trade sales (English), and financial cashiers.

110. Shanghai Tuozhan Electromechanical Equipment Co., Ltd.

Sales manager-fresh graduates, interns, assembly electricians, electrical engineers and mechanical engineers

111. Shanghai Fuyao Bus Glass Co., Ltd.

Mould repairman, management cadre, general worker

112. Shanghai Shenou Enterprise Development Co., Ltd.

Store operation supervisor, brand supervisor, e-commerce operation assistant, e-commerce artist, electrical technician, foreign trade manager/supervisor, general worker (packing and tally), quality inspector, startup worker, buyer, storage and transportation manager/supervisor, and personnel manager.

113. Shanghai Yili Information Technology Co., Ltd.

Debugger, appearance art designer, warehouse manager, tester, assistant quality engineer

Shanghai Jiasong Plastic Products Co., Ltd.

Personnel director, painting technician, injection molding machine adjustor, salesman, quality inspection.

115. Shanghai Shibilao Machinery Equipment Co., Ltd.

Guan Peisheng, salesman, sales engineer, financial supervisor, project manager, marketing specialist and assistant to the general manager.

116. Shanghai Pengbosheng Polyurethane Co., Ltd.

Operator, warehouse keeper, foreign trade and commerce, sales engineer, quality manager, analyst and inspector.

117. Shanghai Feihua Industrial Co., Ltd.

CNC operator, business assistant, CMM inspection, translation and quality engineer.

118. Shanghai Xinyingyuan (Group) Co., Ltd.

Chef/pastry chef, front desk of high-star hotel, marketing specialist, personnel reserve manager.

Weitai Machinery (Shanghai) Co., Ltd.

Tooling technician, project engineer, machining center operator

120. Jishun Asset Management (Shanghai) Co., Ltd.

Business Assistant, Statistician, Personnel Supervisor/Commissioner

121. Shanghai Platinum Pen Co., Ltd.

International Trade Specialists

122. Youfu (Shanghai) Intelligent Sensing Technology Co., Ltd.

Wuxi office account manager, network promotion clerk, sales, sales office, production clerk.

123. Zhongqi Technology (Shanghai) Co., Ltd.

Personnel, operation manager, accountant, foreign trade salesman

124. Shanghai Liupu Mold Technology Co., Ltd.

Technician, duplicate mold worker, accountant, business assistant, sales assistant, painting technician.

125. Shanghai Jinyi Audiovisual Equipment Co., Ltd.

sell

126. Shanghai Zhiyue Electric Co., Ltd

Assistant warehouse manager, reactance and filter technical engineer, reactance and filter technical engineer and salesman.

127. Shanghai Philip Shichuang Technology Co., Ltd.

General worker, lathe operation (milling), system engineer, accountant

128. Yan Xin Instrument Technology (Shanghai) Co., Ltd.

sales engineer

129. Shanghai Yali Machinery Technology Co., Ltd.

Assembler, sheet metal worker, electrical engineer

130. Shanghai Yingying Culture Communication Co., Ltd.

Operation, operation, operation, sales, e-commerce customer service

Shanghai Ouhui Hardware Co., Ltd.

Material warehouse keeper, business assistant and production controller.

132. Shanghai Molido Mould Manufacturing Co., Ltd.

Electrician, gas welder (apprentice), assembler (apprentice), purchasing assistant, equipment maintenance engineer, project development and sales specialist.

133. Shanghai Yumei Medical Technology Co., Ltd.

Inspectors and operators

Shanghai Feiran Brand Management Co., Ltd.

Sales customer service, Taobao customer service, beauty sales

135. Shanghai Jiexiang Measurement and Control Technology Co., Ltd.

salesman

136. Shanghai Xuhang Steel Rolling Co., Ltd.

Operator and mechanic

137. Shanghai Tianshi Electromechanical Equipment Co., Ltd.

Regional sales project manager

Shanghai Xinbin Machinery Co., Ltd.

Milling machine worker, milling machine worker, office clerk, boring machine worker, CNC lathe worker

139. Shanghai Shengzheng Mold Co., Ltd.

Product design/mechanical structural engineer, warehouse manager, e-commerce operation/customer service, mechanical fitter/die fitter, sales specialist/salesman, foreign trade salesman, foreman of die casting workshop.

Shanghai Manrui Precision Machinery Co., Ltd.

Assembly fitter, machining center operator, mechanical design engineer

141. Shanghai Yingda Air Conditioning Equipment Co., Ltd.

Quality inspector, security guard, foreign trade assistant, general worker, disabled person, argon arc welding, gas shielded welding, accounting assistant and clerk.

Shanghai Yunjian Network Technology Co., Ltd.

Development engineer, sales, sales management, sales supervisor, market operation manager.

143. Shanghai Qishen Automation Equipment Co., Ltd

Assistant general manager, electromechanical development engineer, Korean translator, mechanical designer and electrical designer.

144. Shanghai Yizhe Hydraulic Equipment Co., Ltd.

Cost accountant, general worker, purchasing assistant, clerk, die casting technician, production manager, quality inspector, process engineer, supplier development engineer, sales.

Shanghai Sanniu Food Co., Ltd.

General worker, technical apprentice, warehouse keeper, electrician

146. Shanghai Jujing Precision Instrument Manufacturing Co., Ltd.

Assembly technicians, sales engineers, after-sales engineers, mechanical design engineers.

147. Shanghai Nengpu Industrial Co., Ltd.

Assistant engineer, production assistant, general manager assistant, foreign trade assistant, business manager.

148. Shanghai Chuangbiao Mold Industry Co., Ltd.

CNC lathe programmer, internal and external grinder, CNC lathe worker, general lathe worker.

149. Shanghai Shenfeng Medical Care Products Co., Ltd.

Production director, quality assurance specialist, marketing specialist, administrative director and regional sales manager.

150. Shanghai Jiahao Construction Supervision Co., Ltd.

Supervision engineer, supervisor, safety officer and supervision documenter

Shanghai Qiaoyun Technology Co., Ltd.

Sales assistant, warehouse manager, production operator

152. Shanghai Wanzhong Industrial Co., Ltd.

Warehouse keeper, financial accountant, numerical control operator

153. Shanghai Bojian Information Technology Co., Ltd.

File management supervisor, assistant to project manager, file scanner, file management intern, file organizer, file digital input clerk.

154. Jirui Medical Equipment (Shanghai) Co., Ltd.

Foreign trade salesman, head of quality department, administrative clerk, deputy manager of finance and production department, regional manager of domestic sales and foreign trade merchandiser.

155. Shanghai Dianyue Technology (Group) Co., Ltd.

Fashion designer, sales salesman, sales manager

156. Shanghai Xuheng Precision Machinery Manufacturing Co., Ltd.

Trainee, quality inspection, machining center operation, assembly fitter

157. Rong Qing Logistics Supply Chain Co., Ltd.

Logistics reserve cadre, desktop operation and maintenance specialist, warehouse keeper (long-term business trip), English translator, logistics specialist/customer service specialist.

158. Magic Carbon Group Shanghai Industrial Co., Ltd.

Technicians and salesmen

159. Shanghai Uniqi Lighting Co., Ltd.

Electronic test engineer and design assistant

160. Yuxin Machinery (Shanghai) Co., Ltd.

mechanical engineer

161. Shanghai Qingliang Electronics Co., Ltd.

Cleaners, warehouse clerks, general workers, security guards, injection molding technicians, business assistants, quality inspectors, grinders, plumbers, and mold project road engineers.

162. Shanghai Haoyi Automotive Technology Co., Ltd.

CNC machine tool operator and engineer assistant

163. Shanghai Rite Fabric Co., Ltd.

Operators and inspectors

164. Huanmei Garment Accessories Trade (Shanghai) Co., Ltd.

Foreign trade shipping, foreign trade documentary

165. Shanghai Qiuming Standard Parts Co., Ltd.

Inspectors, clerks, electricians, mold workers, administrative safety officers.

Shanghai Huatai Information Technology Co., Ltd.

Inspection and debugging, general engineer, robot technical support engineer

167. Shanghai Sanlian Industrial Co., Ltd.

sales representative

168, Zhejiang Bosheng Steel Group Co., Ltd. Shanghai Branch

Marketing assistant, sales manager

169. Xuan Xu Culture Media (Shanghai) Co., Ltd.

Art teacher, English teacher, math teacher, Chinese teacher, sales/course consultant.

170. Shanghai Lifestyle Catering and Entertainment Management Co., Ltd.

Engineering personnel, warehouse specialists, cashiers, floor attendants, welcome receptionists, restaurant foreman, restaurant supervisor, and restaurant floor manager.

171. Shanghai Pinyi Catering Management Co., Ltd. Qianchuan Catering Service Branch

Messengers, chefs, dishwashers, restaurant managers, waiters.

172. Shanghai Fumao Chemical Co., Ltd

Quality inspector

173. Shanghai Yuerui Precision Machinery Co., Ltd.

Customer service clerk, technical engineer, product inspection

174. Sotis Industrial (Shanghai) Co., Ltd.

Secretary to the chairman, sales (automation industry), embedded system engineer, automation electrical engineer and operation support engineer.

175. Shanghai Beike Culture and Art Development Co., Ltd.

Entrepreneurial partner, primary and secondary school math teacher, primary and secondary school Chinese teacher, primary and secondary school English teacher and course sales consultant.

176. Shanghai Guixing Packaging Equipment Co., Ltd.

Clerk, electrical engineer, mechanical design engineer, fitter.

177. Sujue Test Instrument (Shanghai) Co., Ltd.

Electrician/after-sales engineer, operator/general worker

178. Shanghai Jingju House Leasing Service Co., Ltd.

Market intern, cashier, apartment manager, apartment sales.

179. Ankerui Electric Co., Ltd

Software secondary development engineer, sales engineer, assistant to system project manager, bidding and scheme design engineer, debugging engineer and project manager.

180. Shanghai Faurecia Honghu Exhaust System Co., Ltd.

Project manufacturing engineer and management trainee

181. Shanghai Jinjia Building Materials Technology Co., Ltd.

Assistant general manager, customer service, quality control, storage and drying, assistant engineer of R&D, handyman and mechanic.

182. Shanghai Maojin Logistics Co., Ltd.

Accounts receivable accountant, system operator, dangerous goods driver, escort, financial intern.

183. Shanghai Tongren Environmental Technology Development Co., Ltd.

Electrician, project management, marketing specialist, water supply and drainage design, outdoor landscape design.

184. Shanghai Jiashibao Education and Training Center

Administrative affairs, children’s English teachers, curriculum consultants.

Taicang participating units

185. Huitai (Taicang) Automobile Parts Co., Ltd.

Ordinary operators, die fitters, die fitter apprentices

186. Jiangsu Hongma Technology Co., Ltd.

Operator, inspector, monitor of CNC reserve and apprentice of equipment maintenance.

187. Jiangsu YouPerth Material Technology Co., Ltd.

Engineer

187. Jiangxing (Taicang) Metal Products Co., Ltd.

R&D technician, equipment maintenance reserve engineer, manufacturing reserve engineer, quality engineer and business assistant (Japanese)

188. nine dragons paper (Taicang) Co., Ltd.

Paper production/technology, equipment (machinery, electricity, instrument), thermoelectric operation, hot spot maintenance, environmental protection water treatment, security/fireman, chef/pastry chef, forklift/warehouse manager, general worker, class of 2020.

189. Ruiou Qifu (Suzhou) Packaging Technology Co., Ltd.

Cutting machine master, folding machine operator, printing machine operator

190. Suzhou Deneng Motor Co., Ltd.

CNC lathe, reserve engineer

191. Suzhou Loucheng New Material Technology Co., Ltd.

Chemist, production management/equipment management, personnel administration, finance/internal audit, warehousing and logistics.

192. Taicang Huaying Electronic Material Co., Ltd.

R&D Assistant Engineer, R&D Engineer, Senior R&D Engineer, Test Engineer, IE Engineer, PE Engineer, ME Engineer, PM, Purchasing

193. Taicang Wanfang International Terminal Co., Ltd.

Fee collection business, information technician, mechanical technician

194. Wuxiang Auto Parts (Taicang) Co., Ltd.

Stamper, welding feeder, sheet metal fitter, repairman, tester, production technician

195. Tailin Chemical (Suzhou) Co., Ltd.

Sales manager, R&D personnel

196. Runbang Kagotko Industrial Co., Ltd.

Mechanical engineer, electrical engineer, sales support engineer, lifting control engineer, general ledger accountant, purchasing specialist, mechanical and electrical design intern of 2020.

197. Suzhou Rui High-tech Materials Co., Ltd.

Sales office, logistics staff, purchasing assistant, quality control department, process inspection, customer service, sales clerk, R&D department.

198. Suzhou Yingli Auto Parts Co., Ltd.

Production section chief (direction of hot-pressing injection molding), quality engineer, welding fixture intern, IE engineer, mold fitter, fixture fitter, mechanic, logistics engineering designer, fresh graduates.

199. Jiangsu Branch of Lingyun Genesis Technology Co., Ltd.

Administrative personnel specialist, production monitor, product engineer, welding engineer, electrical engineer, warehouse keeper and inspector.

200. CGNPC High-tech Nuclear Materials Group (Taicang) Delta New Materials Co., Ltd.

R&D, technical assistants, marketers, reserve cadres and operators.

201. Quanrong (Suzhou) Food Co., Ltd.

Warehouse keeper, quality control/food inspection, general worker

202. Jiangsu Huadui Metal Technology Co., Ltd.

Fitter engineer, network manager, assembler, self-made parts, small machine processing

Kunshan participating units

203, Jiangsu Ocean Data Co., Ltd.

Copywriter, JAVA engineer, bank outgoing call specialist by stages, bank telemarketing specialist.

204. Kunshan Bainuo Information Technology Co., Ltd.

Website editor, SEO engineer, website marketing specialist

205. Yinshengye (Beijing) Financial Service Outsourcing Co., Ltd. Kunshan Branch Company

Asset manager, IT engineer, senior personnel supervisor

206. Suzhou Jianwei Industrial Technology Co., Ltd.

IC circuit design engineer, IC layout design engineer, sales engineer, technical support engineer (FAE), software engineer (fresh) and hardware engineer (fresh).

207. Jinya Group

Channel application copy, English study abroad copy, channel market representative, study abroad consultant.

208. Fuyao Semiconductor (Kunshan) Co., Ltd.

Machining technician, mechanical and electrical engineering, production management, quality inspection & measurement, industrial engineer, product engineer, customs broker, sales engineer, industrial safety engineer, fire safety engineer.

209. Kunshan Hezhifu Information Technology Co., Ltd.

Personnel Commissioner, Marketing Director, Sales Commissioner

210. Youlipu Injection Technology (Kunshan) Co., Ltd.

CNC lathe technician, CNC mechanic, junior designer, lathe milling mechanic or apprentice, mold designer, sales engineer.

211. Tengfei Technology Co., Ltd.

Outsourcing, planning, business documentary, technician, QC

212. Guangxi (Kunshan) Supply Chain Management Co., Ltd.

E-commerce operation, Tik Tok (Taobao) live broadcast+online celebrity, beverage technical supervisor, beverage R&D division, and beverage training teacher.

213. Duofu Electronics (Kunshan) Co., Ltd.

Dispatcher, inspector and operator

214. Xiafeng Plastic (Kunshan) Co., Ltd.

Mold Supervisor/Mold Manager, Injection Debugger, General Worker/Operator

215. Jiangsu Delta Logistics Co., Ltd

Reserve cadres (storage direction), logistics specialist (Suzhou), logistics specialist (Kunshan)

216. Kunshan Fangbai Robot Co., Ltd.

Course consultant, robot teacher, educational teacher, administrative front desk, reserve principal/manager.

217. Senna Pharmaceutical Packaging Materials (Kunshan) Co., Ltd.

Production technicians, maintenance engineers, product designers

218. Huadao Data Processing (Suzhou) Co., Ltd.

Bank asset preservation Commissioner, bank bill installment Commissioner, bank collection Commissioner, bank customer acquisition (credit card promotion) Commissioner

219, Kunshan Kaixin Precision Machinery Co., Ltd.

Mechanical engineer, assembly team leader, assembly technician, surface treatment technician, general worker

220. Liuhe Light Alloy (Suzhou) Co., Ltd.

Laboratory, biotechnology, electrical, operators

221. Meichang Technology Kunshan Co., Ltd.

ME TEchnician, te technician, PC, PE technician

222. Jianda Rubber (China) Co., Ltd.

R&D Engineer, Chemical Engineer, testing engineer, Biotechnology Engineer, Programmer, Livelihood Sponsor.

223. Kunshan Longzhong Maishigui Auto Parts Co., Ltd.

Quality engineer, reserve cadre, production plan

Original title: "1000+ jobs, recruiting more than 3,000 people! @ Jiading people, don’t miss this big job fair tomorrow! 》